Rugged Ethernet connectors for military communications and networking introduced by Stewart Connector
GLEN ROCK, Pa. – The Bel Fuse Inc. Stewart Connector segment in Glen Rock, Pa., is introducing the Category 8.2 series Ethernet connectors for military communications, industrial equipment interfaces, and other high-speed and high-noise networking protocols.
The Category 8.2 series also is for data centers looking to upgrade their data transmission speeds without switching over to a more costly fiber optic solution.
These Ethernet connectors provide throughput as fast as 2 GHz as defined by ISO/IEC 11801-1 Class II and can support 100 Watts of power over Ethernet applications in a 30-meter channel.
The Category 8.2 series consists of cable-mounted field-terminatable keystone jacks and patch cords that support future Ethernet speeds of 25GBASE-T and 40GBASE-T over copper twisted pair cable.
The Category 8.2 series networking connectors expands Stewart Connector’s ARJ45 Category 7a product line and is a high-performing twisted pair interconnect system available for Ethernet connectivity.
Stewart’s ARJ45 connectors offer end-to-end pair isolation and use individually shielded pair cable to keep internal and alien crosstalk to a minimum.
Stewart Connector’s Category 8.2 cable jacks and cable assemblies are available from distributors Digi-Key; Mouser; and Newark. For more information contact Steward Connector online at https://www.belfuse.com/stewart-connector.
