Power line filters to protect shielded rooms from electromagnetic interference introduced by AstrodyneTDI

HACKETTSTOWN, N.J. – AstrodyneTDI in Hackettstown, N.J., is introducing the F series facility and shielded room power line filters to enhance safety and block unwanted electromagnetic interference in shielded aerospace, defense, and industrial facilities.

The F series facility and shielded rooms power line filters features several design configurations including multi-line cabinet-style filter solutions and compact box-style single and dual-line filters.

With attenuation of 100dB at 14 KHz to 10 GHz by MIL-STD-220, these facility filters comply with the requirements of MIL-PRF-15733 and MIL-STD-810 and are safety approved to UL 1283, CE, and CSA C22.2 #8-13.

Astrodyne TDI’s F series filters also can achieve extended insertion loss performance to 40 GHz when installed with proper electromagnetic interference shielding and isolation.

Related: Nuclear proliferation raises the specter of EMP attack

Bleeder resistors are built into each filter line to discharge the capacitor voltage to ground potential during power shutdown Designed to operate continuously at rated currents and voltages Withstand a 40 percent current overload for 15 minutes without degradation.

The output compartment comes with a non-corrosive EMI-environmental gasket to prevent RF leakage and accommodate maximum isolation between input and output compartments. The input compartment is provided with a moisture-resistant gasket.

These devices have current ratings of 20 to 2500 amps for cabinet style design, 20 to 400 amps for single-line compact design, and 20 to 100 amps for dual-line compact design.

For more information contact AstrodyneTDI online at www.astrodynetdi.com.