Wilkinson power dividers for antennas, mobile internet, test, and WiFi applications introduced by BroadWave

GREENWOOD, Ind. – BroadWave Technologies Inc. in Greenwood, Ind., is introducing the model series 179-179-XXX 75-Ohm Wilkinson power dividers for antennas, mobile internet, test, and WiFi applications.

These power dividers feature 20-decibel minimum isolation, and are developed for high-speed satellite broadband services. These units pass the DC signal through one port only, while the DC signal is blocked on all other ports. The DC passing port is marked on the unit.

Available in 2-, 4-, and 8-way configurations these power dividers offer operating frequency range of 900 to 2150 MHz, average power rating of 10 Watts, operating temperature range of -55 to 85 degrees Celsius, and F female RF connectors.

Amplitude balance is plus-or-minus 0.3-decibels maximum, and voltage standing wave ratio (VSWR) is 1.40:1 maximum for the 2- and-4 way configurations. Amplitude balance is plus-or-minus 0.5 decibels maximum and VSWR is 1.50:1 maximum for the 8-way configuration.

Solutions featuring 75 Ohm BNC and N RF connectors also are available. For more information contact BroadWave Technologies online at www.broadwavetechnologies.com.